Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

Instant Bond Wood Adhesive Thin Adhesive

Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

The thin viscosity product offers the fastest assembly time of 5 seconds and an initial cure speed of 3 seconds. It is ideal for repairing hair line cracks and small defects in wood, as well as repairing loose veneer edges. It can also be used as a finish. While Titebond Instant Bond Activator can be used to further reduce set times, it is not required for producing strong, tight-fitting joints.

  • Fast set - Eliminates clamping or reduces clamp time

  • Bonds stronger than wood

  • Excellent heat and solvent-resistance

  • Unaffected by finishes

  • Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more

  • 2 year shelf life

  • Triple distilled for purity & consistency

  • Impact-resistant

  • No-clog applicator for easy use and waste reduction

  • MIL Spec (A46050C) Type II, Class 1

Type: Ethyl cyanoacrylate Reactive VOC: 20 g/L State : Liquid Weight Per Gallon : 9.18 lbs. Color : Clear Flashpoint : > 178° F. Dried Film: Translucent Freeze/thaw Stability : Stable Solids : 100% Specific Gravity: 1.09 Viscosity : 5 cps Storage Life : 2 yrs in tightly closed bottles stored between 40° & 75°F

Bond Strength ASTM D-1002
Temperature Shear Strength psi
Room Temperature Between 2800 and 4200 psi depending on substrate tested

Application Temperature

Above 50°F.

Cure Speed

5 second handling, 3 second set, 30 second cure. *Full cure in 8 hours.

Service Temperature Range

-65° to 200° F.


Use acetone. Follow solvent vendor’s precautions.

Titebond Instant Bond Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F. KEEP FROM FREEZING.
DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, fl ush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
62012 Oz. Bottle2.600370830620141003708306201115210
62024 Oz. Bottle3.610370830620211003708306202810270
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam