Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

GREENchoice Professional Cove Base Adhesive

GREENchoice Professional Cove Base Adhesive is designed for the quick and easy installation of rubber and vinyl cove bases. Its fast, strong grab holds materials firmly in place and eliminates sagging. It offers excellent adhesion to drywall, plaster, paint, wallpaper, paneling and ceramic tile.

GREENchoice Professional Cove Base is a VOC-compliant formula containing no ozone-depleting chemicals, making it safer for you and the environment. Unlike solvent-based adhesives, it is nonflammable, emits no harmful fumes and cleans up with water.

  • Environmentally safe - VOC-compliant

  • Fast grab - Excellent adhesion

  • Impact-resistant

  • Eliminates sagging

  • Bonds to all common wall surfaces

  • Cleans easily with water in wet state

  • Cartridge and carton contain post-consumer recycled material

Calculated VOC: 48.52 g/L State : Medium-viscosity mastic Weight Per Gallon : 11.5 lbs. Color : Beige Flashpoint : > 200°F. Solids : 77% Freeze/thaw Stability : Stable Viscosity : 145,000 cps Storage Life : 18 months in an unopened container pH : 7.0

Coverage (maximum): Approximate length of bead according to bead diameter
Container 1/8” bead 1/4” bead 3/8” bead
10.5 oz. Cartridge 129 ft. 32 ft. 14 ft.
29 oz. Cartridge 355 ft. 89 ft. 39 ft.

Application Temperature

Over 40°F. for adhesive and substrates

Service Temperature Range

0°F. to 120°F.

Method of Application

Cartridge/caulking gun, trowel or putty knife

Working Surfaces

Cutting and piecing should be done before applying adhesive. Surfaces to be bonded should be clean, dry and free from oil and grease or any other material that may deter adhesion. Apply enough adhesive to hold cove base in place without causing squeeze-out. Press the cove base firmly and uniformly against the wall within 5-10 minutes after applying adhesive. Irregular or curved wall surfaces may require bracing until adhesive has set.

Maximum Coverage

10.5 oz. Cartridge: Approximately 15-25 linear feet of 4 inch cove base using a double ¼ inch bead or zigzag pattern
29 oz. Cartridge: Approximately 44-63 linear feet of 4 inch cove base using a double ¼ inch bead or zigzag pattern


Tools and excess adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.

GREENchoice Professional Cove Base Adhesive is not designed for continuous submersion. When applying over paint, wallpaper, ceramic tile or other non-porous materials, ""roughing up"" the area by sanding or scraping will increase bond strength. For best results, store adhesive above 40°F.
CAUTION: EYE AND SKIN IRRITANT. Contains ethylene glycol. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
340110.5 Oz. Cartridge12.990370830340111003708303401812108
340229 Oz. Cartridge34.52037083034028100370830340251244
34044 Gallon Pail48.95037083034042 136
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam