Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

Titebond Cold Press HPL

Titebond Cold Press for HPL is a high-quality, economical alternative to contact cement for large-scale flat laminating. It is specifically formulated for cold press laminating of High Pressure Laminates and backed veneers to solid woods, particleboard, MDF, plywood and other porous materials.

Titebond Cold Press is also suitable for most veneer and panel-on-frame applications. It offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements.

  • Moderate speed of set

  • Economical alternative to contact cement

  • Dries translucent

  • Water cleanup & non-toxic

  • Suitable for large-scale flat laminating

  • Suitable for panel-on-frame cold press applications

Type: Modified PVA emulsion Calculated VOC: 3.2 g/L State : Liquid Weight Per Gallon : 9.7 lbs. Color : Off White Chalk Temperature: Approximately 50°F. Dried Film: Translucent Flashpoint : > 200°F. Solids : 42% Freeze/thaw Stability : Stable Viscosity : 4,500 cps pH : 4.9 Storage Life : 12 months in tightly closed containers at 70°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
  Temperature Strength Wood Failure
  Room Temperature 2,711 psi 32%
  150°F. Overnight 1,890 psi 1%

Application Temperature

Above 50°F.

Open Assembly Time

15 minutes (70°F./50% RH)

Total Assembly Time

15-20 minutes (70°F./50%RH)

Minimum Required Spread

Approximately 6 mils or 250 square feet per gallon

Required Pressure Application

30-80 psi for HPL, 100-150 psi for Panel-on-Frame, 100-250 psi for Veneer

Method of Application

For most consistent coverage a mechanical spreader is recommended.


Damp cloth while glue is wet. Scrape off and sand dried excess.

Titebond Cold Press for HPL is specifically designed for laminating flexible materials and is not suited for other types of assembly applications. Vacuum pressing should only be used for veneers up to 1/16 inch in thickness. Do not use when temperature, glue or materials are below 50°F. Not recommended for exterior use or where moisture is likely. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.
CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate. Don not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: if swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
46175 Gallon Pail51.58037083046175 124
461855 Gallon Drum575.05  14
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam