Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

GREENchoice Fast Grab FRP Adhesive

Titebond GREENchoice Fast Grab FRP Adhesive is a high-quality, VOC-compliant, adhesive specifically formulated for the installation of FRP (fiber-reinforced plastic) panels. Its fast grab and bonding power greatly reduce the need for extended bracing.

GREENchoice Fast Grab FRP is environmentally superior and contains no ozone-depleting chemicals. Unlike solvent-based adhesives, it is nonflammable, emits no harmful fumes and cleans up with water.

Download Titebond GREENchoice FRP Adhesive Information Sheet
Download Titebond GREENchoice FRP Adhesive With Applicator Information Sheet

Watch a video about our new size and innovative applicator!

  • Meets GreenSeal GS-36, LEED, SCAQMD, CARB and NAHB Green Building specifications
  • Exceeds ASTM C557 specification
  • Food and Drug Administration (FDA) and Canadian Food Inspection Agency (CFIA) approved for indirect food contact.

Revised September 2017

  • Environmentally safe - VOC-compliant

  • Quick grab - Minimal bracing

  • Nonflammable - No offensive odor

  • Bond FRP to many common porous building materials

  • Cleans easily with water in wet state

  • Achieves NFPA Class A fire rating

  • The 28 ounce cartridge has an attachable applicator that allows adhesive to be dispensed and troweled simultaneously

Type: Proprietary emulsion polymer Calculated VOC: 27.04 g/L State : Low viscosity mastic Weight Per Gallon : 11.6 lbs. Color : Light beige Flashpoint : > 200°F. Solids : 67% Freeze/thaw Stability : Stable Viscosity : 100,000 cps pH : 5.0 Storage Life : Up to 2 years in unopened container

50 sq. ft. per gallon

Application Temperature

Over 50°F and below 90°F for adhesive and substrates.

Service Temperature Range

0°F. to 110°F.

Method of Application

The optimal trowel for best overall performance and coverage is a v-notch trowel, 3/16” wide x 1/4” deep, spaced 1/2” c.c. (or 5/16" space). The adhesive applicator tool that is provided with the 28 oz. cartridge is a v-notch trowel. Guides on back of the tool help hold applicator in the correct position, and pins manipulate flow.Trowels using dimensions other than the optimal size can be used, but they may affect working time and coverage. For additional trowel recommendations, please contact Franklin Technical Service at 1.800.347.4583.

Working Time

20 minutes at 70°F.

Application Directions

For 28 oz. cartridge: Remove adhesive applicator from top of cartridge. Cut nub of cartridge at first ridge evenly, and then screw adhesive applicator back on cartridge. Use the guides on back of applicator within 20 minutes at 70°F. Keep adhesive applicator clean and free of adhesive buildup to ensure proper application.

FRP Installation Guide

Working Surfaces

Surfaces must be dry and free of any material that may deter adhesion, including severe and thick amounts of drywall joint compound. Patch large holes and depressions and remove any bumps or high spots, dust, oil, and grease. Concrete surfaces must be well cured and completely dry. Cut and pre-fit all panels. Lay fiberglass panels flat and let them acclimate to room temperature 24 hours before installing. Note: Panels used in conjunction with channel moldings should NOT fit tightly into the moldings. Leave a small gap under the molding for expansion and follow panel manufacturer’s recommendations. Any holes drilled through the panels for fasteners, pipes or conduits should be oversized to allow for natural movement of the panel. Click for FRP Installation Guide.


Tools and excess adhesive may be cleaned with water while wet. If adhesive has dried, use mineral spirits. Follow solvent vendor's precautions when using solvents. The 28 oz. cartridge applicator must be cleaned thoroughly to be reused. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.

For best results, store GREENchoice Fast Grab FRP Adhesive above 50°F. Do not use over treated plywood or metal, plastic, foam board, greenboard, painted surfaces, sealed concrete, certain types of specially treated or moisture resistant gypsum wallboard, or other non-porous surfaces. For these substrates, for use on freezers, and any other application other than FRP, call Technical Service at 1-800-347-4583. KEEP FROM FREEZING.
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
405228 Oz. Cartridge34.63037083040524100370830405211244
40544 Gallon Pail50.58037083040548 136
4056Gallon Pail24.7003708304056210037083040569275
40593.5 Gallon Pail43.77037083040593 136
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam