Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

Titebond Melamine Glue

Titebond Melamine Glue is designed for bonding wood, particleboard, MDF and other porous substrates to synthetic materials such as melamine, vinyl and HPL as well as metals. It offers a fast initial tack, yet has a longer open time that allows for the accurate alignment of working materials.

Titebond Melamine Glue is a water-based adhesive that is nonflammable, has low odor, dries clear and cleans up with water. Its thicker formulation offers fewer runs and drips, making it easier to use and more effective for precise assemblies.

Download Titebond Melamine Sales Sheet

Conforms to ASTM D-4236

  • Bonds melamine, vinyl coated products, and HPL to porous materials

  • Thicker formulation - fewer runs and drips

  • Fast setting - Excellent strength

  • Dries clear

  • Long open time

  • Fast initial tack

Type: Specialized vinyl acetate emulsion Calculated VOC: 77 g/L State : Liquid Weight Per Gallon : 8.6 lbs . Color : White Chalk Temperature: * Approximately 40 °F. Dried Film: Clear Flashpoint : > 200 °F. Solids : 57% Freeze/thaw Stability : Unstable Viscosity : 12,000 cps pH : 4.0 Storage Life : 24 months in tightly closed containers at 75 °F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
  Substrates Strength Substrate Failure
  Melamine/Melamine Lap Shears 329 psi 100%
  Melamine/particle Board 339 psi 100%

Application Temperature

Above 40 °F.

Open Assembly Time

5 minutes (70 °F./50%RH)

Total Assembly Time

10-15 minutes (70°F./50%RH)

Minimum Required Spread

Approximately 6 mils or 250 square feet per gallon

Required Clamping Pressure

Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application

Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.


Damp cloth while glue is wet. Scrape off and sand dried excess.

Titebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16 inch in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.
CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate and dipropylene glycol n-butyl ether. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
401416 Oz. Bottle14.190370830401421003708304014912100
4016Gallon Jug18.2603708304016610037083040163263
40175 Gallon Pail45.81037083040173 124
401855 Gallon Drum491.71  14
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam