Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

Titebond Tongue & Groove Glue

Titebond® Tongue & Groove Flooring Glue is a premium wood glue that passes the stringent ANSI Type II water resistance test. In addition, it offers a lower chalk temperature and a two-year shelf life, both of which make it unique to the industry. Titebond Tongue & Groove Flooring Glue is formulated for all types of laminated and engineered wood flooring products that are installed using the floating system, even over radiant heat systems. It provides a superior bond at the tongue and groove. Due to its white color, the glue is easy to see for quick clean-up. It is non-toxic and nonflammable, making it safe to use and environmentally friendly. It resists solvents and water when dry. Titebond Tongue & Groove Flooring Glue gives the professional installer the highest level of protection against potential moisture problems, while maintaining a strong ultimate bond.

  • Superior bond strength
  • Environmentally superior
  • Fast drying

Revised October 2017

  • Recommended for all types of laminated and engineered wood flooring products that are installed using the floating system

  • Recommended for floors over a radiant heat system

  • Passes Type II water-resistance testing

  • Low chalk temperature

  • Fast drying

  • Easy application process

  • Noticeable white color for easy cleanup

  • Easy cleanup when glue is wet

  • Resists solvents & water when dry

  • Freeze/thaw stable

  • Environmentally superior and safe to use

  • Non-toxic

  • Nonflammable

  • VOC-compliant with all federal and state regulations as well as the SCAQMD

  • Product is FloorScore® certified by SCS

Type: Cross-linking polyaliphatic emulsion Calculated VOC: 13.7 g/L State : Liquid Weight Per Gallon : 9.1 lbs. Color : White Chalk Temperature: 55°F. Dried Film: Translucent Flashpoint : > 200°F Solids : 48% Freeze/thaw Stability : Stable Viscosity : 4,000 cps pH : 3.0 Storage Life : 2 years in tightly closed container at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
  Temperature Strength Wood Failure
  Room Temperature 3,750 psi 72%
  150°F. Overnight 1,750 psi 6%

Application Directions

Always follow the wood flooring manufacturers’ directions for the use of their products. Some flooring products may require less glue. Engage the tongue and groove snugly. A tapping block may be necessary. Remove excess glue from the surface while wet with a damp cloth. Make sure all excess glue is removed since dried glue on the surface will be difficult to remove. Do not install flooring at temperatures below 55°F. For additional questions, please contact Technical Service at 1.800.347.4583

Application Temperature

Above 55°F.

Assembly Time After Glue Application

5 minutes (70°F./50%RH)

Method of Application

Plastic bottles with fine tips.


Titebond Tongue & Groove Flooring Glue can be installed using the continuous bead method. When using this method, a water-resistant joint is created. Follow the flooring manufacturers’ directions for proper positioning of the adhesive bead. Some manufacturers prefer gluing the top of the tongue and others prefer gluing of the groove. Titebond Tongue & Groove Flooring Glue is the professional installer’s choice for either method.


125 linear feet per bottle.


Wet adhesive can be cleaned with using Titebond Adhesive Remover Cleaning Wipes or water and a damp cloth. If adhesive has dried, scrape off excess. For specific cleaning instructions, please call Franklin Technical Service at 1.800.347.4583.

Titebond Tongue & Groove Flooring Glue passes Type II water-resistance tests. Do not use for joints below the waterline or continuous submersion. Do not use when temperature, glue or materials are below 55°F with normal humidity conditions.. KEEP FROM FREEZING. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Remove excess glue from surface while wet using Titebond Adhesive Remover Cleaning Wipes. Do not allow glue to dry as it will be difficult to remove.
CAUTION: WARNING. May cause eye, skin, and respiratory tract irritation. Do not get in eyes or on skin or clothing. Do not breathe vapors. Do not swallow. Use in well-ventilated area. FIRST AID: If swallowed, do not induce vomiting. Contact a poison control center immediately. In case of eye contact, flush with water for 15 minutes. For skin contact, wash thoroughly with soap and water. If respiratory difficultly, remove to fresh air. For additional information, refer to Safety Data Sheet. KEEP OUT OF REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
210416 Oz. Bottle15.610370830210421003708302104912100
210855 Gallon Metal Drum538.80  14
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam