Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

GREENchoice Advanced Polymer Panel Adhesive

Titebond GREENchoice Advanced Polymer Panel Adhesive is a high performance, professional strength advanced polymer adhesive specifically formulated to be used for most types of paneling installations. It has fast grab, a rapid cure rate, trowels easily, is moisture, mold and mildew resistant, and contains no water.

GREENchoice Advanced Polymer Panel's formula is VOC-compliant, nonflammable, and environmentally safe — emitting no harmful fumes and promoting healthy living and working environments.

Download Titebond GREENchoice Advanced Polymer Panel Adhesive Sales Sheet

Exceeds the performance requirements of ASTM C557 and meets GreenSeal GS-36, LEED, SCAQMD, CARB and NAHB Green Building specifications.
Revised January 2018

  • Environmentally safe - VOC-compliant

  • Fast strength development

  • Nonflammable - No offensive odor

  • Ideal for FRP, laminate & more

  • Bonds non-porous surfaces

  • Moisture, mold & mildew resistant

  • Achieves NFPA Class A fire rating

Type: Polyether Calculated VOC: 0 g/L (20 g/L during cure) State : Low viscosity mastic Weight Per Gallon : 11.2 lbs. Color : Light tan Flashpoint : > 200°F (Pensky-Martens Closed Cup) Solids : 100% Freeze/thaw Stability : Not affected by freezing Viscosity : 125,000 cps Storage Life : 12 months in unopened container

60 sq. ft. per gallon

Application Temperature

Over 50°F and below 90°F for adhesive and substrates.

Service Temperature Range

-40°F. to 220°F.

Method of Application

3/16”w x 1/4”d x 11/16” c-c (or 1/2” space) V-notch for about 60 sq. ft. per gallon coverage.
3/16”w x 1/4”d x 1/2” c-c (or 5/16” space) V-notch for about 50 sq. ft. per gallon coverage

Working Time

20 minutes at 70°F.

Working Surfaces

Surfaces must be free of any material that may deter adhesion, including severe and thick amounts of drywall joint compound. Patch large holes and depressions and remove any bumps, high spots, dust, oil, and grease. Cut and pre-fit all panels. Lay panels flat and let them acclimate to room temperature 24 hours before installing. Note: Bracing may be required if walls or panels are not straight. Panels used in conjunction with channel moldings should NOT fit tightly into the moldings. Leave a small gap under the molding for expansion and follow panel manufacturer’s recommendations. Any holes drilled through the panels for fasteners, pipes or conduits should be over-sized to allow for natural movement of the panel.


It is important to clean-up adhesive immediately while still wet. To clean adhesive from panel, tools and hands while wet, use mineral spirits and a rag. Once adhesive has cured, it can be extremely difficult to remove. Follow solvent vendor’s precautions. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.

FRP Installation Guide
For best results, store GREENchoice Advanced Polymer Panel Adhesive above 50°F. Before installation it is important to wipe down all metals with acetone if an oily residue is present as this can deter adhesion. When bonding two non-porous substrates together, particularly in low humidity climates, it is recommended to lightly mist the wall substrate with water just before applying panel. Panels that do not lay flat or are heavier in weight may require at least 24 hours of blocking and bracing or permanent mechanical fasteners. If applying adhesive over painted, plastered, or seal coated surfaces, please contact Titebond Help Line at 888-533-9043.
WARNING: May cause eye irritation. May cause an allergic skin reaction. Wear protective gloves. Avoid breathing vapor. FIRST AID: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses and continue rinsing. IF EYE IRRITATION PERSISTS: Get medical attention. IF ON SKIN: Wash with plenty of soap and water. IF ON SKIN: Wash with plenty of soap and water. IF SKIN IRRITATION OR RASH OCCURS: Get medical attention. Wash contaminated clothing before reuse. Dispose of contents and container in accordance with all local, regional, national and international regulations. For additional information, refer to Safety Data Sheet.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
4319A3.5 Gallon Pail42.79037083043198 136
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam