Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

Titebond Concrete Repair Sealant

Titebond® Concrete Repair is a durable, acrylic latex formula for the repair of cracks in concrete, masonry and stucco surfaces. It is ideal for sidewalks, patios, basements, driveways, steps, mortar joints and house structures. In addition, it develops a strong, flexible bond that will not chip, peel or pull away from the surface.

Titebond Concrete Repair dries quickly to a textured gray color that blends well with the surrounding surfaces. It provides an air-tight weather-resistant seal that helps prevent water and ice damage. In addition, Titebond Concrete Repair is ready to use, extrudes easily and cleans up with water when wet.

Download Titebond Concrete Repair Sealant Sheet

    Complies with the following requirements:
  • ASTM C834 Type OP Grade -18°C

Revised August 2017

  • Fills and seals cracks in concrete & masonry

  • Durable - Resists oil, gas, grease and salt

  • Textured formula blends with surface

  • Extrudes easily & cleans up with water

  • Excellent adhesion and flexibility

  • Mildew resistant

  • Paintable

  • UV-resistant

Type: Acrylic Non-reactive VOC: 21 g/L (<1.5%) Color : Gray Weight Per Gallon : 14.02 lbs. Solids : 83% Flashpoint : Solvent free/Not applicable Viscosity : 550,000 cps Storage Life : 24 months in tightly closed containers at 50°F to 80°F. Freeze/thaw Stability : Stable

Coverage (maximum): Approximate length of bead according to bead diameter:
Container 1/4" bead 3/8" bead 1/2" bead
10.1 oz. Cartridge 31 ft. 14 ft. 8 ft.

Application Temperature

Above 40°F and below 120°F.

Service Temperature Range

-25°F. to 180°F.

Method of Application

Cartridge/caulking gun

Working Time

Approximately 10-15 minutes for a 1/4" bead

Working Surfaces

Surfaces must be cleaned down to the original substrate, dry, and free from any material that may deter adhesion.


Clean excess material with a damp cloth. Clean hands and tools with soap and water. Scrape dried excess.

Dry Time

Titebond Concrete Repair should be dry to the touch and ready to paint in 2-4 hours.

Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. It is not designed for continuous submersion or use below the waterline. For questions, please call our Help Line at 1-800-347-4583.
WARNING: EYE, SKIN AND RESPIRATORY IRRITANT. Contains acrylic polymer, limestone, titanium dioxide, ethylene glycol. Harmful if swallowed. Long term exposure to ingredients in this product can increase the risk of certain cancers. Adverse reproductive effects have been reported in animals. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate personal protective equipment. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

WARNING: This product contains a chemical known to the state of California to cause cancer and birth defects or other reproductive harm.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
317110.1 Oz. Cartridge15.000370830317131003708303171012108
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam