Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS

Titebond Blacktop Repair Sealant

Titebond® Blacktop Repair is a durable, acrylic-latex formula for the repair of cracks in asphalt driveways, playgrounds, pavement and parking lots. It offers excellent adhesion and flexibility, which are superior to traditional tar or asphalt repair products. In addition, it resists oil, gas, grease and salt and it will not chip, peel or pull away from the surface.

Titebond Blacktop Repair dries quickly to a textured black color that blends well with the surrounding surfaces. It provides an air-tight water-resistant seal that helps prevent water and ice damage. In addition, Titebond Blacktop Repair is ready to use, extrudes easily and cleans up with water when wet.

Download Titebond Blacktop Repair Sealant Sheet

    Complies with the following requirements:
  • ASTM C834 Type OP Grade -18°C

Revised August 2017

  • Fills and seals cracks in asphalt surfaces

  • Durable - Resists oil, gas, grease and salt

  • Textured formula blends with surface

  • Extrudes easily & cleans up with water

  • Mildew resistant

  • UV-resistant

Type: Acrylic Non-reactive VOC: 21 g/L (<1.5% wt.) Color : Black Weight Per Gallon : 14.02 lbs. Solids : 83% Flashpoint : Solvent free/Not applicable Viscosity : 550,000 cps Storage Life : 24 months in tightly closed containers at 50°F to 80°F. Freeze/thaw Stability : Stable

Coverage (maximum): Approximate length of bead according to bead diameter:
Container 1/4" bead 3/8" bead 1/2" bead
10.1 oz. Cartridge 31 ft. 14 ft. 8 ft.

Application Temperature

Above 40°F and below 120°F.

Service Temperature Range

-25°F. to 180°F.

Method of Application

Cartridge/caulking gun

Working Time

Approximately 10-15 minutes for a 1/4" bead

Working Surfaces

Surfaces must be cleaned down to the original substrate, dry, and free from any material that may deter adhesion.


Clean excess material with a damp cloth. Clean hands and tools with soap and water. Scrape dried excess.

Dry Time

Allow to dry 24 hours before direct contact with water. Wait 24 hours prior to coating with an asphalt or tar based driveway sealer.

Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. Allow to cure 24 hours before direct contact with water. Wait 24 hours prior to coating with an asphalt or tar based driveway sealer. It is not designed for continuous submersion or use below the waterline. For questions, please call our Help Line at 1-800-347-4583.
WARNING: EYE, SKIN AND RESPIRATORY IRRITANT. Contains limestone, ethylene glycol, acetaldehyde, vinyl acetate and crystalline silica. Harmful if swallowed. Long term exposure to ingredients in this product can increase the risk of certain cancers. Adverse reproductive effects have been reported in animals. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate personal protective equipment. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
318110.1 Oz. Cartridge15.420370830318121003708303181912108
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam