Construction Adhesives

Application Guidelines

Application Temperature:

32°F to 120°F

Service Temperature Range:

-20°F to 120°F

Method of Application:

Cartridge/caulking gun

Working Time:

Approximately 1 hour

Skin Time:

15-20 minutes at 50% relative humidity

Working Surfaces:

Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.

Cleanup:

Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.

Coverage:

Container	1/8” Bead	1/4" Bead	3/8" Bead	1/2" Bead
10 oz. Cartridge	123 ft.	30 ft.	13 ft.	8 ft.
28 oz. Cartridge	343 ft.	86 ft.	38 ft.	21 ft.

Limitations:

Titebond Fast Set Polyurethane Construction Adhesive is not designed for continuous submersion. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. When using on non-porous substrates, mist with water to speed curing.