TITEBOND SOLVENT FREE CLEAR PRESSURE SENSITIVE ADHESIVE


Titebond Solvent Free Clear Pressure Sensitive Adhesive is a latex-based, clear thin spread formula for the installation of vinyl, vinyl composition and asphalt tiles, as well as foam-backed hardwood parquet tiles. It combines a fast tack with a long open time. Titebond Solvent Free is environmentally superior and contains no ozone-...

more

Features & Benefits

check_circle
Ideal for paper and felt backed vinyl, vinyl composition and carpet tiles
check_circle
Quick grab - Strong bond
check_circle
Water-resistant - Freeze/thaw stable
check_circle
Environmentally safe - Nonflammable

Application Guidelines

Application Temperature:
Above 65°F. for adhesive and substrates
Service Temperature Range:
40°F. to 120°F.
Method of Application:
Airless mastic spray gun, roller, trowel or brush. For smooth surfaces, use a
1/32" U-notch trowel. For rough surfaces, use a 1/16" square-notch trowel.
Working Time:
72 hours maximum
Working Surfaces:
Surface must be dry and free of any material that may deter adhesion. Cut and fit all material before applying adhesive. Apply adhesive. Adhesive is ready when it becomes nearly clear and no longer transfers to the finger when lightly touched. Set tiles in place carefully because they will not slide. Roll within 12 hours. Allow adhesive to dry well before exposing installations to cleaning water.
Cleanup:
Clean tools and excess adhesive with water while wet. If adhesive has dried, use mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.
Limitations:
Do not use directly over or under solid vinyl tile or sheet goods. Remove old vinyl flooring before laying new floor. Keep from freezing. Subfloor and materials should be at least 65°F. for 24 hours before and after installation.

Physical Properties

Type
Latex
Calculated VOC
16.2 g/L
State
Low viscosity mastic
Weight Per Gallon
9.2 lbs.
Color
Beige
Flashpoint
> 200°F.
Solids
65%
Freeze/thaw Stability
Stable (5 cycles @20 °F.)
Viscosity
Roller, trowel, spray grade
Storage Life
24 months in tightly closed containers at 75°F.

TROWEL RECOMMENDATIONS AND COVERAGE

FLOORING TYPE TROWEL SIZE TROWEL TYPE COVERAGE
MOST APPLICATIONS SPRAY, ROLLER OR BRUSH   APPROXIMATELY 125-150 SQ. FT. PER GALLON
SMOOTH SURFACES 1/32" U-NOTCH APPROXIMATELY 135 SQ. FT. PER GALLON
ROUGH SURFACES 1/16" SQUARE-NOTCH APPROXIMATELY 150 SQ. FT. PER GALLON
CLEAN TROWEL WITH WATER OFTEN TO PREVENT ADHESIVE BUILD-UP.

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye and skin contact areas persists, contact physician. For additional information, refer to Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.