TITEBOND PAINTER'S PLUS CAULK


Titebond Painter's Plus Caulk is an interior and exterior use, siliconized acrylic caulk that provides a strong, weather-resistant seal for most construction and repair applications. It is easy to extrude, resists cracking and chalking and won't stain or bleed through the paint. This mildew resistant formula contains no plasticizers...

more

Features & Benefits

check_circle
IDEAL FOR: Sealing joints, repairing cracks and back-filling gaps for interior or exterior applications.
check_circle
SEALS: Wood, metal, glass, masonry, aluminum, brick and most common building materials.
check_circle
No plasticizers or phthalates
check_circle
Provides a flexible, watertight seal
check_circle
Tools easily and cleans up with water
check_circle
No residual odor
check_circle
De-aired for a smoother bead
check_circle
Mildew resistant

Application Guidelines

Application Temperature:
Above 40°F (4°C)
Service Temperature Range:
-25°F to 180°F -25°F to 180°F (-31°C to 82°C) white and colors, 0°F to 160°F (-18°C to 71°C) clear.
Method of Application:
Cartridge/caulking gun
Working Time:
Approximately 10-15 minutes for a 1/4" bead
Application Directions:
1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2" in width. 2. Cut tip at 45° angle for 1/8" to 1/2" bead and place in cartridge gun. 3. Force caulk into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
Painting:
The caulk should be dry to the touch and ready to paint in 2-4 hours.
Cleanup:
Clean uncured material with water. After curing, excess caulk must be cut or scraped away.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Limitations:
Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Physical Properties

Type
Siliconized acrylic
Calculated VOC
<50 g/L (<1.5%)
Color
White, clear and colors
Weight Per Gallon
13.5 lbs. white,
8.8 lbs. clear,
14.02 lbs. colors
Solids
82% white,
60% clear,
87% colors
Flashpoint
Solvent free/Not applicable
Viscosity
550,000 cps white, 600,000 cps clear, 500,000 cps colors
Freeze / Thaw Stability
Stable
Storage Life
24 months in a dry location at or below 75°F.

SPECIFICATIONS

Exceeds:
  • ASTM C834 TYPE OP GRADE -18°C (WHITE AND COLORS)
  • ASTM C834 TYPE C GRADE 0°C (CLEAR)

Warranty Statement

40 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.