Titebond

TITEBOND CONTRACTOR GRADE SUBFLOOR ADHESIVE

Titebond Contractor Grade Water-Based Subfloor Adhesive is a professional-strength formula that is specifically designed for subfloor installations and general plywood use. It provides a permanent bond that remains flexible, reduces nailing and helps prevent squeaky floors. The VOC-compliant, nonflammable formula is environmentally safe – emitting no harmful fumes and promoting healthy living and working environments.

Features & Benefits

  • Recommended For: Subfloor installations, general plywood use, as well as filling gaps and irregularities in the subfloor.
  • Compatible Materials Common building materials including wood, engineered lumber, particleboard, OSB and wet, frozen and treated lumber.
  • All Weather 20°F – 120°F
  • Reduces floor squeaks
  • Solvent free
  • Highly water-resistant when dry
  • Professional strength and durability
  • Reduces nailing
  • Fills gaps & irregularities
  • VOC-compliant
  • Excellent aging qualities
  • Offers freeze/thaw stability

Specifications & Certifications

  • Exceeds APA AFG-01 and ASTM C557.

Application Guidelines

  • Application Temperature: 20°F to 100°F
  • Service Temperature Range: 0°F to 120°F
  • Working Time: Approximately 15 minutes for a 1/4’’ bead
  • Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
  • Application: Cut tip straight across for 1/4’’ to 3/8’’ bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes or before skinning of adhesive occurs. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
  • Cleanup: Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vender’s precautions.

Coverage

Size1/8” Bead1/4" Bead3/8" Bead1/2" Bead
28 Oz. Cartridge355 ft.86 ft.39 ft.21 ft.


Physical Properties

  • Type: Blend of polymer emulsions
  • State: Medium-viscosity mastic
  • Color: Off white
  • Solids: 67.5%
  • Viscosity: 82,500 cps
  • pH : 7.5
  • VOC: <50 g/L
  • Flashpoint: >200°F
  • Freeze / Thaw Stability: Stable
  • Storage Life: 18 months in an unopened container

Limitations

Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams. Do not adhere one non-porous material to another as this will slow or prevent drying. Not recommended for use on moisture resistant OSB.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
72820370830728221003708307282928 Oz. Cartridge30.021244
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International