Titebond

TITEBOND ROOF CEMENT SEALANT

Titebond Roof Cement Sealant is an all-weather, asphalt based patching compound specifically designed and formulated to repair cracks, seams, gaps and holes in roofing materials. This sealant is ideal for repair and new construction roofing applications. It is used to set flashings, drip edges and roofing material edges as well as the installation of shingles and roll roofing.

Features & Benefits

  • IDEAL FOR: Sealing around skylights, vents, chimneys, valleys and exhaust pipes.
  • SEALS: Metal, aluminum, asphalt, shingles, masonry, wood and most common building materials.
  • Stops roof leaks
  • All-weather formula
  • Resists cracking
  • Will not run or bubble
  • Excellent for repair or new construction

Specifications

    Exceeds:
  • Federal Specification SS-C-153C Type I
  • ASTM D6511
  • ASTM D4586
  • SCAQMD RULE #1168

Application Guidelines

  • Application Temperature: Above 50°F (10°C)
  • Service Temperature Range: -40°F to 120°F (-40°C to 49°C)
  • Method of Application: Cartridge/caulking gun
  • Tooling Time: For a 1/4" bead, approximately 10-20 minutes
  • Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. 2. Cut tip to desired bead width and shape and place in cartridge gun. 3. Apply generously as needed. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Cleanup: Clean uncured material with xylene or equivalent solvent. After curing, excess sealant must be cut or scraped away. Follow solvent vendor's precautions when using solvents.
  • Coverage:
    Container 1/4" Bead 3/8" Bead 1/2" Bead
    10.3 oz. Cartridge 32 ft. 14 ft. 8 ft.

Physical Properties

  • Type: Asphalt
  • Calculated VOC: 300 g/L (27%)
  • State: Medium-viscosity mastic
  • Color: Black
  • Flashpoint: > 105°F
  • Solids: 77.5%
  • Freeze / Thaw Stability: Will not freeze
  • Viscosity: 150,000 cps
  • Storage Life: 12 months in a dry location at or below 75°F.

Limitations

Air, sealant and surface temperature should be above 50°F. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2 hours. Do not thin. DO NOT APPLY DIRECTLY TO HEAT/FLAMES. Do not apply to plastic, EPDM, Hypalon or similar type of synthetic rubber roof systems. For best results, store in a dry location at or below 75°F.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
32110370830321161003708303211310.3 Oz. Cartridge10.1812108

Warranty Statement

Liability is limited to product replacement only.
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International