TITEBOND DOWELING GLUE

Titebond Doweling Glue is specifically designed for use with automatic doweling equipment. Its low viscosity (1500 cps.) allows the appropriate flow through feed lines and injectors of most U.S.-made doweling machinery. Titebond Doweling sets fast to reduce assembly time, offers excellent strength and provides a translucent glue line. It is formulated for use on solid woods, particleboard, MDF, plywood and other porous materials.

Features & Benefits

  • For use with American-made doweling equipment
  • Excellent strength
  • Fast setting
  • Low viscosity for better flow
  • Dries translucent

Application Guidelines

  • Application Temperature: Above 50°F (10°C)
  • Assembly Time After Glue Application: 0-5 minutes (70°F./50% RH)
  • Method of Application: Compatible with most U.S.-made doweling machines. See your machine’s manual for details.
  • Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,650 psi 68%
150°F. Overnight 1,250 psi 1%

Physical Properties

  • Type: Polyvinyl acetate emulsion
  • Type: Polyvinyl acetate emulsion
  • Calculated VOC: 10.2 g/L
  • State: Liquid
  • Weight Per Gallon: 9.1 lbs.
  • Color: White
  • Dried Film: Translucent
  • Flashpoint: > 200°F
  • Solids: 51%
  • Freeze / Thaw Stability: Stable
  • Viscosity: 1,500 cps
  • pH : 4.5
  • Chalk Temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
  • Storage Life: 12 months in tightly closed containers at 70°F

Limitations

Titebond Doweling Glue is specifically designed for use with American-made doweling equipment. Because of its low viscosity it is not well suited for other assembly applications. This product may be used as supplied or diluted with water by as much as 5% to improve flow. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
22070370830220705 Gallon Pail48.26124

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International