Titebond TiteShield Sealant is a high performance, multi-purpose, elastomeric sealant that provides a weatherproof shield against the elements. It is ideal for windows, doors, siding, trim and most construction and repair applications. This VOC-compliant, low odor formula remains flexible and will not crack or get brittle with age. ...


Watch Video

Features & Benefits

IDEAL FOR: Sealing windows, doors, siding, trim, vents and baseboards for interior and exterior applications
SEALS: Siding, windows, doors, trim, PVC, glass, wood, metal, aluminum, masonry, marble, brick, stone, concrete, ceramic tile and most common building materials.
Joint movement capability ± 50%
Interior & exterior
9 colors
Fills gap up to 2"
Remains flexible – will not crack

Application Guidelines

Application Temperature:
Above 40°F (4°C)
Service Temperature Range:
-25°F to 180°F (-31°C to 82°C) white and colors, 0°F to 160°F (-18°C to 71°C) clear
Method of Application:
Cartridge/caulking gun
Working Time:
Approximately 10-15 minutes for a 1/4" bead
Application Directions:
1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2” in depth. 2. Cut tip at 45° angle for 1/8” to 1/2” bead and place in cartridge gun. 3. Apply sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
The sealant should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours.
Clean uncured material with water. After curing, excess caulk must be cut or scraped away.
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Not designed for continuous submersion or use below the waterline. May cause temporary staining on porous stone; test before use. Air, sealant and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Clear sealant will be white during application but will clear within 7-14 days. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. This product is freeze/thaw stable. Sealant may appear to have a different tint/color when initially extruded until it is fully dried/cured. For best results, store in a dry location at or below 75°F. Storage at temperatures above 120°F (48.9°C) may cause a reaction in the sealant resulting in a granulated texture.

Physical Properties

High performance elastomeric
Calculated VOC
<50 g/L (<1.5%)
Solvent free/Not applicable
350,000 cps white & colors; 550,000 cps clear
Freeze / Thaw Stability
Storage Life
24 months in a dry location at or below 75°F.


  • AAMA 808.3-16 Type I
  • ASTM C834 Type OP Grade -18°C
  • ASTM C920 Type S Grade NS Class 50 (white & colors)
  • ASTM C920 Type S Grade NS Class 25 (clear)
  • Federal Specification TT-S-00230C Type II Class A

Warranty Statement

Liability is limited to product replacement only.