TITEBOND II PREMIUM WOOD GLUE


Titebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Titebond II Premium provides a strong initial tack, fast speed of set,...

more

Watch Video

Features & Benefits

check_circle
First one-part wood glue to pass ANSI Type II water-resistance
check_circle
Designed for exterior use
check_circle
Excellent sandability
check_circle
Unaffected by finishes
check_circle
FDA approved for indirect food contact
check_circle
Ideal for radio frequency (R-F) and hot press gluing systems
check_circle
Easy cleanup with water

Application Guidelines

Application Temperature:
Above 55°F
Open Assembly Time:
3-5 minutes (70°F./50%RH)
Total Assembly Time:
10-15 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

Type
Cross-linking polyvinyl acetate
Calculated VOC
< 4 g/L
State
Liquid
Weight Per Gallon
9.1 lbs.
Color
Honey cream
Dried Film
Translucent, yellow
Solids
48%
Freeze / Thaw Stability
Stable
Flashpoint
> 200°F
Viscosity
4,000 cps
pH
3.0
Chalk Temperature
To assure a good bond, 55°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
24 months in tightly closed containers at 75°F

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,750 psi 72%
150°F. Overnight 1,750 psi 6%


Specifications

  • CONFORMS TO ASTM D-4236

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Contains aluminum chloride. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.