TITEBOND III ULTIMATE WOOD GLUE


Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is solvent free and cl...

more

Watch Video

Features & Benefits

check_circle
Passes ANSI/HPVA Type I water-resistance
check_circle
Waterproof formula that cleans up with water
check_circle
Superior strength - Strong initial tack
check_circle
Designed for interior and exterior applications
check_circle
Longer open assembly time
check_circle
Lower application temperature
check_circle
Unaffected by finishes
check_circle
FDA approved for indirect food contact

Application Guidelines

Application Temperature:
Above 47°F
Open Assembly Time:
8-10 minutes (70°F./50%RH)
Total Assembly Time:
20-25 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond III Ultimate Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact our Technical Support Team at 1-800-347-4583. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

Type
Advanced Proprietary Polymer
Calculated VOC
< 0.1 g/L
State
Liquid
Weight Per Gallon
9.22 lbs
Color
Tan
Dried Film
Light brown
Flashpoint
> 200°F
Solids
52%
Freeze / Thaw Stability
Stable
Viscosity
4,200 cps
pH
2.5
Chalk Temperature
To assure a good bond, 45°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
24 months in tightly closed containers below 75°F

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 4,000 psi 57%
150°F. Overnight 800 psi 0%


Specifications

  • CONFORMS TO ASTM D-4236