Titebond

X-TREME MULTI-PURPOSE CLEANER


Titebond WeatherMaster X-TREME Multi-Purpose Cleaner is designed to clean up WeatherMaster X-TREME foam sealants. This product is an acetone cleaner and is not meant to be used on surfaces that are not solvent or acetone resistant. The Cleaner is a spray solvent used to dissolve uncured foam. X-TREME Cleaner can also be attached to ...

more

Features & Benefits

check_circle
Cleans sealant and adhesive dispensing unit
check_circle
Removes adhesives and uncured foam
check_circle
General purpose cleaner

Application Guidelines

Application Temperature:
65 to 80°F (18 to 27°C)
Dispensing Unit Cleaning Option:
While holding the spray activator aside, screw the X-TREME Multi-Purpose Cleaner container into the basket adapter until it will go no further. Do not over-tighten. Carefully pull the Dispensing Unit trigger until solvent extrudes from the gun. Release the Dispensing Unit trigger and let the solvent soak in the Dispensing Unit for one to two minutes. Pull Dispensing Unit trigger and dispense solvent into a suitable container. If necessary, repeat process until only clear solvent appears. Do not store Dispensing Unit with X-TREME Multi-Purpose Cleaner attached. For best results store Dispensing Unit with a fresh can of X-TREME foam sealant or adhesive.
Limitations:
  • Flush Dispensing Unit after every 10 to 20 cans of foam or adhesive
  • Wear protective glasses or goggles, nitrile gloves and clothing that protects against dermal exposure.
  • Use only in a well ventilated area.
  • Do not use in horizontal position.
For questions, please call our Help Line at 1.800.347.4583 or visit us at Titebond.com.

Physical Properties

Type
Polyurethane foam sealant remover
Reactive VOC
0 g/L
Freeze / Thaw Stability
Stable
Flashpoint
0°F (-18°C) (Acetone Supplier)
Storage Life
5 years

Caution Statement

DANGER: Extremely flammable aerosol. Contains gas under pressure and may explode if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep away from heat, sparks, open flames and hot surfaces. No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do not breathe mist, vapors, or spray. Do not get in eyes, on skin, or on clothing. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing, and eye protection. FIRST AID: IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms call a POISON CENTER or doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses and continue rinsing. If irritation persists: Get medical advice or attention. FIRE: In case of fire: Use water fog, foam, dry chemical, or CO2 for extinction. Eliminate all ignition sources if safe to do so. Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50°C/ 122°F. Dispose of contents and container in accordance with applicable local, regional, national, or international regulations. For additional information, refer to Safety Data Sheet.

Warranty Statement

LIMITED WARRANTY: Buyer assumes all risks of use, handling and storage of product not in strict accordance with label directions. Liability for any incidental or consequential damage or loss is specifically excluded at all times. Any implied warranty of merchantability or fitness for particular use is excluded. Seller will not accept liability for more than product replacement.